Dell SonicWALL GX250 Manual Download

Page: 86 / 200

Page 86 NETWORK ACCESS RULES

•

Allow traffic from the Internet to a mail server on the LAN.

•

Restrict users on the LAN from using a specified service, such as QuickTime.

•

Allow specified IP addresses on the Internet to access a sensitive server on the
LAN.

To create custom

Network Access Rules

, click

Access

on the left side of the browser

window, and then click the

Rules

tab at the top of the window.

Note

: Use extreme caution when creating or deleting Network Access Rules, because

it is possible to disable firewall protection or block access to the Internet.

integrated_manual.book Page 86 Wednesday, June 13, 2001 6:21 PM

Summary of Contents for SonicWALL GX250









































































































































































































Search results

Summary of Contents for SonicWALL GX250

Reviews:

Related manuals for SonicWALL GX250

Brands by name

Popular brands

Dell SonicWALL GX250, Manual

Search results

Summary of Contents for SonicWALL GX250

Reviews:

Related manuals for SonicWALL GX250

Brands by name

Popular brands