Dell SonicWALL GX250 Manual Download Page 62

Page: 62 / 200

Page 62

CONTENT FILTERING AND BLOCKING

In the

If Filter List Not Loaded

section, select either

Block traffic to all web

sites except for Trusted Domains

Allow traffic to all web sites

is selected,

Forbidden Domains

and

Keywords

are still blocked.

Note

: The SonicWALL does not ship with the Content Filter List installed. Registering

the SonicWALL provides a one month trial subscription to the Content Filter List. Upon

registering, a temporary, one-month account is created. Follow the "Download Now"

instructions to install the initial Content Filter List.

Click

Update

. Once the SonicWALL is updated, a message confirming the update is

displayed at the bottom of the browser window.

Customizing the Filter List

Click

Filter

on the left side of the browser window, and then click on the

Customize

tab at the top of the window.

The

Customize

window allows you to customize the

Content Filter List

by manually

blocking or allowing Web site access.

To allow access to a Web site that is blocked by the

Content Filter List

, enter the

host name, such as “www.ok-site.com”, into the

Trusted Domains

fields. 256 entries

may be added to the

Trusted Domains

list.

integrated_manual.book Page 62 Wednesday, June 13, 2001 6:21 PM

Summary of Contents for SonicWALL GX250









































































































































































































Search results

Summary of Contents for SonicWALL GX250

Reviews:

Related manuals for SonicWALL GX250

Brands by name

Popular brands

Dell SonicWALL GX250, Manual

Search results

Summary of Contents for SonicWALL GX250

Reviews:

Related manuals for SonicWALL GX250

Brands by name

Popular brands