manualshive.com logo in svg

Dell SonicWALL GX250, Manual

Share
Download
Dell SonicWALL GX250 Manual Download Page 174

Page 174 Configuring SonicWALL Settings for Viewpoint

Setting the ViewPoint Report Date

You may change the ViewPoint report date quickly and easily.

1. To change the report date, click the 

Date

 option in the top right corner of the 

browser window. 

2. The current report date is highlighted in the ViewPoint date calendar. Select the 

desired month and year from the 

Month

 and 

Year 

menus.

3. Select the desired day in the ViewPoint date calendar. The new report date will be 

displayed in the upper right corner of the ViewPoint Report window. The ViewPoint 
report table and chart is also updated to show the new report date.

4. Click 

Close

 to close the ViewPoint Date Selector window.

integrated_manual.book  Page 174  Wednesday, June 13, 2001  6:21 PM

Summary of Contents for SonicWALL GX250









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands