Page 42 NETWORK SETTINGS
8. Click
Update
. Once the SonicWALL has been updated, a message confirming the
update is displayed at the bottom of the browser window. Restart the SonicWALL
for these changes to take effect.
If you enable Network Address Translation, designate the
SonicWALL LAN IP
Address
as the gateway address for computers on your LAN. Consider the following
example:
•
The SonicWALL
WAN Gateway (Router) Address
is "100.1.1.1".
•
The SonicWALL
WAN IP (NAT Public) Address
is "100.1.1.25".
•
The private SonicWALL
LAN IP Address
is "192.168.168.1".
•
Computers on the LAN have private IP addresses ranging from "192.168.168.2" to
"192.168.168.255".
In this example, "192.168.168.1", the SonicWALL
LAN IP Address
, should be the
gateway or router address for all computers on the LAN.
Multiple LAN Subnet Mask Support
Firmware 6.1.0.0 supports multiple subnet masks on the LAN without the use of a
second router. Click
General
on the web management interface and then select the
Network
tab. Type in the LAN subnet address into the
Subnet Mask
field and click
Update
. The subnet mask address appears in the list of subnet addresses in the
LAN
Settings
section.
integrated_manual.book Page 42 Wednesday, June 13, 2001 6:21 PM
