Dell SonicWALL GX250 Manual Download Page 69

Page: 69 / 200

SonicWALL Internet Security Appliance Guide Page 69

Preferences

Click

Tools

on the left side of the browser window, and then click the

Preferences

tab at the top of the window.

You can save the SonicWALL settings, and then retrieve them later for backup
purposes. It is recommended to save the SonicWALL settings when upgrading the
firmware.

The

Preferences

window also provides options to restore the SonicWALL factory

default settings and launch the SonicWALL Installation Wizard. These functions are
described in detail in the following pages.

integrated_manual.book Page 69 Wednesday, June 13, 2001 6:21 PM

Summary of Contents for SonicWALL GX250









































































































































































































Search results

Summary of Contents for SonicWALL GX250

Reviews:

Related manuals for SonicWALL GX250

Brands by name

Popular brands

Dell SonicWALL GX250, Manual

Search results

Summary of Contents for SonicWALL GX250

Reviews:

Related manuals for SonicWALL GX250

Brands by name

Popular brands