Adding and Replacing Parts
109
FILE LOCATION: C:\Documents and Settings\reggie_davis\Desktop\Projects-07\BEN\Source\parts.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 1 / 2 5/ 0 7 – F O R PR O O F O N LY
c
Lift the card out of its connector.
NOTICE:
The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and
realign the card.
NOTE:
Do not insert a Mobile Broadband network card into the WLAN card slot.
NOTE:
The WLAN card may have two or three connectors, depending on the type of card you ordered.
6
Install the card:
NOTICE:
To avoid damaging the WLAN card, never place cables on top of or under the card.
a
Move any antenna cables out of the way to make space for the WLAN card.
b
Align the card with the connector at a 45-degree angle, and press the card into the connector until
it clicks.
NOTE:
Your WLAN card may have two or three connectors, depending on the type of card you ordered. Most
connectors have color-coded markings that correspond to the type of cable required.
NOTE:
For more specific information about which cable to connect to which connector, see the documentation
that came with your WLAN card.
7
Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly.
Mobile Broadband Cards
1
Follow the procedures in "Before You Begin" on page 95.
2
Remove the hinge cover (see "Hinge Cover" on page 100).
1
WLAN card
2
metal securing tabs (2)
1
2
