104
Adding and Replacing Parts
FILE LOCATION: C:\Documents and Settings\reggie_davis\Desktop\Projects-07\BEN\Source\parts.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 1 / 2 5/ 0 7 – FO R PR O O F O N LY
NOTICE:
Insert memory modules at a 45-degree angle to avoid damaging the connector.
NOTE:
If the memory module is not installed properly, the computer may not boot properly. No error message
indicates this failure.
6
Ground yourself and install the new memory module:
a
Align the notch in the module edge connector with the tab in the connector slot.
b
Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it
clicks into place. If you do not feel the click, remove the module and reinstall it.
7
Replace the keyboard (see "Keyboard" on page 101).
8
Replace the hinge cover (see "Hinge Cover" on page 100).
9
Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical
outlet.
10
Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system
configuration information.
To confirm the amount of memory installed in the computer, click
Start
, click
Help and Support
, and
then click
Computer Information
.
To install a memory module in DIMM B:
1
Follow the procedures in "Before You Begin" on page 95.
1
memory module
2
securing clips (2)
1
2
