Dell PowerScale OneFS Reference Manual Download Page 112

Page: 112 / 208

Administrator action

Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see

Gathering cluster logs

1100000007

CloudPools no usable account found.

Description

CloudPools is unable to write data to the cloud storage account because it is disabled.

Administrator action

Confirm that the account is disabled by running the following command:

isi cloud accounts view <id>

If the account is disabled, enable the account by running the following command:

isi cloud accounts modify <id> --enabled yes

1100000008

CloudPools could not verify a provider certificate.

Description

The certificate for the specified cloud provider is not properly installed or is not valid.

Administrator action

Contact the cloud provider to obtain a valid certificate.

1100000009

Invalid CloudPools gconfig settings.

Description

CloudPools has invalid gconfig settings and requires modification.

Administrator action

A service request (SR) has been opened on your behalf.

112

Software events

Summary of Contents for PowerScale OneFS

















































































































































































































Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands

Dell PowerScale OneFS, Reference Manual

Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands