Dell PowerScale OneFS Reference Manual Download Page 194

Page: 194 / 208

900180004

A fan has failed.

Description

There is a bad, degraded, or missing fan.

Administrator action

Replace the fan.

900180005

NVDIMM battery has failed.

Description

There is a bad, degraded, or missing NVDIMM battery.

Administrator action

Replace the NVDIMM battery.

900180006

NVDIMM battery charge is low and is below an acceptable threshold and that a vault might fail.

Description

There is a low charge in the NVDIMM battery. When the event is identified, data loss is prevented by placing the node into
read-only mode.

Administrator action

If the battery does not service, or charge on its own, replace the battery.

900180007

NVDIMM battery charge has been low for the exceeded time threshold.

Description

The NVDIMM battery has had a low charge for 86,400 s (24 hours).

194

Hardware events

Summary of Contents for PowerScale OneFS

















































































































































































































Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands

Dell PowerScale OneFS, Reference Manual

Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands