Dell PowerScale OneFS Reference Manual Download Page 199

Page: 199 / 208

900180031

NVDIMM is in the wrong DIMM slot.

Description

NVDIMM was replaced in the wrong DIMM slot.

Administrator action

See the OEM manual for proper DIMM replacement procedure, and replace the NVDIMM int the correct slot.

900180032

NVDIMM subsystem health is not being monitored. The node transitions to read-only mode until the issue has been resolved.

Description

Dell PowerTools are not responding to service requests.

Administrator action

To determine the problem, run the

isi_hwmon -b IDRACServices

command.

910100001

A fan in the node might have failed.

Description

If the fan speed temporarily falls out of optimal range for less than a minute or so and the event does not repeat, this event
might be a false alarm.

Administrator action

Follow the instructions in

Event notification: Fan speed out of spec

article 000083406

to determine if this event is a false

alarm.

If this event is not a false alarm, contact Technical Support.

910100002

A voltage component is out of specification.

Administrator action

Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see

Gathering cluster logs

Hardware events

199

Summary of Contents for PowerScale OneFS

















































































































































































































Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands

Dell PowerScale OneFS, Reference Manual

Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands