Dell PowerScale OneFS Reference Manual Download Page 109

Page: 109 / 208

Administrator action

Contact Dell EMC PowerScale Technical Support to determine if one of the components or motherboard must be replaced on
the node or nodes.

800010008

The NVRAM journal is larger than the journal backup partition.

Description

The system has resized the journal partition.

Administrator action

This message is informational. No action is required.

800010009

There was an error calculating the partition size of the NVRAM journal backup.

Description

The system is resetting the partition to the default size of 512 MB.

Administrator action

This message is informational. No action is required.

800010010

A node was unable to verify the backup copy of its journal on its peer node.

Description

There are two possible issues that might result in this event:

●

The local copy of a node's journal is not valid.

●

There was an error when a node tried to verify the local copy of its journal against the mirror copy of its journal on its peer
node.

Administrator action

If the link between peer nodes has been temporarily interrupted then this event will resolve when the link between the two
nodes is reestablished.

If the event persists, gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to
gather cluster logs, see

Gathering cluster logs

Software events

109

Summary of Contents for PowerScale OneFS

















































































































































































































Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands

Dell PowerScale OneFS, Reference Manual

Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands