Dell PowerScale OneFS Reference Manual Download Page 53

Page: 53 / 208

100020062

A fault was detected in a drive sled.

Description

A drive sled has failed and must be replaced. The event message provides you with the failed drive sled and the node that the
sled is a part of.

Administrator action

Gather logs, and then contact Technical Support for additional troubleshooting. For instructions on how to gather cluster logs,
see

Gathering cluster logs

100020063

A drive sled has been removed from the chassis for longer than the timeout limit.

Description

A drive sled was removed from a chassis and wasn't replaced before the sled service timeout limit was exceeded. As a result,
the drive sled was smartfailed. The event message provides you with the node and drive sled that was removed.

Administrator action

Replace the drive sled.

100030001

Drives have been marked as draining but usage is low.

Description

Drives have been marked as draining but usage is low. Please remove the draining flag from the drive.

Administrator action

Remove the draining flag from the drive.

200010001

One or more nodes in your cluster is offline or unreachable.

One or more nodes are offline due to one of the following conditions:

●

A node was intentionally shut down for maintenance.

●

A node lacks internal network connectivity. Internal connectivity is how a node communicates with other nodes on the
cluster.

●

A node cannot join the group.

Software events

Summary of Contents for PowerScale OneFS

















































































































































































































Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands

Dell PowerScale OneFS, Reference Manual

Search results

Summary of Contents for PowerScale OneFS

Reviews:

Related manuals for PowerScale OneFS

Brands by name

Popular brands