Dell PowerEdge T110, Hardware Owner'S Manual

Page: 43 / 144

Using the System Setup Program and UEFI Boot Manager
43
PCI IRQ Assignments Screen
Serial Communication Screen
Embedded Video
Controller
(
Enabled default)
Enables or disables BIOS support for the integrated video
controller.
NOTE:
This field can be disabled only if an add-in video
card is present. If this field is disabled, remote access
features such as virtual KVM are not available.
Option Description
< PCIe device > Use the <+> and <-> keys to manually select an IRQ
for a given device, or select
Default to allow the BIOS to
select an IRQ value at system startup.
Option Description
Serial Communication
(
On without Console
Redirection default)
Selects whether the serial communication devices
(
Serial Device 1 and Serial Device 2 ) are enabled in
BIOS. BIOS console redirection can also be enabled and
the port address used can be specified.
Options are On without Console Redirection , On with
Console Redirection via COM1 , On with Console
Redirection via COM 2, and Off .
Serial Port Address
(
Serial Device 1=COM1,
Serial Device2=COM2
default)
Sets the serial port addresses for the two serial devices.
NOTE:
Only Serial Device 2 can be used for Serial Over
LAN (SOL). To use console redirection by SOL, configure
the same port address for console redirection and the
serial device.
External Serial Connector
(
Serial Device1 default)
Specifies whether Serial Device 1 , Serial Device 2 , or
Remote Access Device has access to the external serial
connector.
NOTE:
Only Serial Device 2 can be used for SOL. To use
console redirection by SOL, configure the same port
address for console redirection and the serial device.
Option Description
Mayzie_HOM.book Page 43 Monday, August 31, 2009 9:33 PM