Dell PowerEdge T110, Hardware Owner'S Manual

Page: 17 / 144

About Your System
17
Power Selection
The voltage selection switch on the back panel of the system allows you to
select one of two primary voltage inputs.
Figure 1-4. Power Selection Switch
CAUTION:
Be sure to set the voltage selection switch on the power supply for the
voltage that most closely matches the AC power available at your location.
Ensure that the switch is set to the proper voltage according to Table 1-1.
Table 1-1. Voltage Selection Switch
If your power source is: The voltage selection switch should be set to:
110 V
220 V
115
230
Mayzie_HOM.book Page 17 Monday, August 31, 2009 9:33 PM