Dell PowerEdge T110 Hardware Owner'S Manual Download Page 129

Page: 129 / 144

Getting Help

129

Getting Help

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE:

If you do not have an active Internet connection, you can find contact

information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options.
Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or
customer service issues:

Visit

support.dell.com

Verify your country or region in the

Choose A Country/Region

drop-down

menu at the bottom of the page.

Click

on the left side of the page.

Select the appropriate service or support link based on your need.

Choose the method of contacting Dell that is convenient for you.

Mayzie_HOM.book Page 129 Monday, August 31, 2009 9:33 PM

Summary of Contents for PowerEdge T110

















































































































































Search results

Summary of Contents for PowerEdge T110

Reviews:

Related manuals for PowerEdge T110

Brands by name

Popular brands

Dell PowerEdge T110, Hardware Owner'S Manual

Search results

Summary of Contents for PowerEdge T110

Reviews:

Related manuals for PowerEdge T110

Brands by name

Popular brands