Processor specifications
The PowerEdge R830 system supports up to four Intel Xeon E5-4600 v4 product family processors.
PSU specifications
The PowerEdge R830 system supports up to two AC redundant power supply units (PSU).
Table 11. PSU specifications
PSU
Class
Heat dissipation
(maximum)
Frequency
Voltage
750 W AC
Platinum
50/60 Hz
100–240 V AC, autoranging
1600 W AC
Platinum
100–240 V AC, autoranging
NOTE: If a system with 1600 W PSUs
operates from 100 to 120 V, then the
power rating per PSU is derated to 800
W.
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: This system is also designed to connect to the IT power systems with a phase to phase voltage not exceeding 230
V.
System battery specifications
The PowerEdge R830 system supports CR 2032 3.0-V lithium coin cell system battery.
Expansion bus specifications
The PowerEdge R830 system supports PCI express (PCIe) generation 3 expansion cards, which need to be installed on the system
board using expansion card risers. This system supports three types of expansion card risers.
Memory specifications
The PowerEdge R830 system supports DDR4 registered DIMMs (RDIMMs) and load-reduced DIMMs (LRDIMMs).
Table 12. Memory specifications
Memory module sockets
Memory capacity
Minimum RAM
Maximum RAM
Forty-eight DIMM sockets •
64 GB or 128 GB quad rank
(LRDIMMs)
•
8 GB single rank (RDIMMs)
•
16 GB or 32 GB dual rank
(RDIMMs)
8 GB with dual processors
(minimum one memory module
per processor)
LRDIMM up to 6144 GB with
four processors
Drive specifications
Hard drives
The PowerEdge R830 system supports SAS, SATA, or Nearline SAS hard drives.
23
