Figure 86. Installing the 2.5 inch (x8) SAS/SATA backplane
1.
hard drive connector on the backplane
2.
hard drive backplane
3.
hooks (3)
4.
securing slots (3)
5.
release tab
6.
backplane power cable
7.
SAS cable (2)
8.
backplane signal cable
9.
mini SAS connector (2)
Next steps
1.
Install the hard drives in their original locations.
2.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Hard drives
After working inside your system
Control panel
The control panel contains the power button, the diagnostic indicators, and the front USB ports.
Removing the control panel
Prerequisites
1.
Follow the safety guidelines listed in safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
Keep the Phillips #2 screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
144
