Figure 64. Installing the optional internal dual SD module
1.
IDSDM
2.
pull tab
3.
IDSDM connector
Next steps
1.
Install the SD cards.
NOTE: Re-install the SD cards into the same slots based on the labels you had marked on the cards during removal.
2.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing an internal SD card
After working inside your system
Network daughter card
The Network daughter card (NDC) is a small, removable mezzanine card. The NDC provides you with the flexibility of choosing
different network connectivity options, for example—4 x 1GbE, 2 x 10GbE and 2 x Converged Network Adapter.
Removing the network daughter card
Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
3.
If installed, remove the expansion card riser 1.
4.
Keep the Phillips #1 screwdriver ready.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
123
