Dell PowerEdge C8000 Owner'S Manual Download Page 90

Page: 90 / 295

Using the System Setup Program

C7 State

(

Enabled

default)

Enables or disables the processor C7 state.

NOTE:

This feature is available when the processor supports

C7 state.

NOTE:

Disable this option at your own risk. When you disable

this option, a pop up message appears on the screen and

warning appears in the System Setup Help.

XD Bit Capability

(

Enabled

default)

Enables or disables the processor’s Execute Disable (XD)

Memory Protection Technology feature.

Direct Cache Access

(

Enabled

default)

Enables or disables the direct cache access.

Hyper-Threading

Technology

(

Enabled

default)

Enables or disables the Hyper-Threading technology.

Prefetch Configuration Press <Enter> to configure the prefetch settings.

NOTE:

This feature is available when supported by the

processor.

Option

Description

Summary of Contents for PowerEdge C8000








































































































































































































































































































Search results

Summary of Contents for PowerEdge C8000

Reviews:

Related manuals for PowerEdge C8000

Brands by name

Popular brands

Dell PowerEdge C8000, Owner'S Manual

Search results

Summary of Contents for PowerEdge C8000

Reviews:

Related manuals for PowerEdge C8000

Brands by name

Popular brands