Dell PowerEdge C8000, Owner'S Manual

Page: 206 / 295

206
Installing System Components
Figure 3-12. Removing and Installing a PSU Module
Installing the PSU Module
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Slide the new PSU module into the PSU bracket. See Figure 3-12.
2 Close the handle on the PSU module. See Figure 3-12.
3 Replace the PSU module on the sled tray. See "Installing the PSU1/3
Module Assembly" on page 203 or "Installing the PSU2/4 Module
Assembly" on page 204.
NOTE:
After installing a power sled with a new PSU module, allow several seconds
for the system to recognize the power supply and to determine if it is working
properly. The status indicator turns green to signify that the module is functioning
properly.
1 handle 2 PSU module
3 PSU bracket 4 release lever