manualshive.com logo in svg

Dell PowerConnect W Airwave 7.1, User Manual

The Dell PowerConnect W Airwave 7.1 is a cutting-edge networking solution that enhances connectivity. Seamlessly manage your network with the comprehensive User Manual, available for free download on our website. Optimize your networking experience with this manual, crafted to provide in-depth instructions for maximizing the potential of your product.

Share
Download
background image

268

  |  Creating, Running, and Emailing Reports

Dell PowerConnect W AirWave 7.1

  | User Guide

Figure 186  

Reports > Generated > Daily Configuration Audit 

Report Page, abbreviated example

Using the Device Summary Report

The 

Device Summary Report

 identifies devices that are the most or least used devices, and a comprehensive list 

of all devices. One potential use of this report is to establish more equal bandwidth distribution across multiple 
devices. This report contains the following five lists of devices.

Table 136  

I Daily Configuration Audit Report

Field

Description

Name

Displays the device name for every device on the network. Clicking a given device name in this column allows 

you to display device-specific configuration.

Folder

Displays the folder in which the device is configured in AWMS. Clicking the folder name in this report displays 

the APs/Devices > List page for additional device, folder and configuration options.

Group

Displays the group with which any given device associates. Clicking the group for a given device takes you to 

the Groups > Monitor page for that specific group, to display graphical group information, modification options, 

alerts, and an audit log for the related group. 

Mismatches

This field displays configuration mismatch information. When a device configuration does not match ideal 

configuration, this field displays the ideal device settings compared to current settings.

Summary of Contents for PowerConnect W Airwave 7.1















































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W Airwave 7.1

D-Link DIR-862L Manual preview
DIR-862L
Brand: D-Link Pages: 4
D-Link DIR-860L Quick Install Manual preview
DIR-860L
Brand: D-Link Pages: 2
D-Link DIR-850L Resetting Manual preview
DIR-850L
Brand: D-Link Pages: 9
D-Link DIR-850L Setup And Installation Manual preview
DIR-850L
Brand: D-Link Pages: 8
D-Link DIR-865L Specifications preview
DIR-865L
Brand: D-Link Pages: 3
D-Link DIR-867 Quick Install Manual preview
DIR-867
Brand: D-Link Pages: 28
D-Link DIR-X1530 Quick Start Manual preview
DIR-X1530
Brand: D-Link Pages: 2
D-Link DSL-2540B - ADSL2/2+ Modem With EN Router Quick Install Manual preview
DSL-2540B - ADSL2/2+ Modem With EN Router
Brand: D-Link Pages: 12
D-Link DIR-882 Quick Installation Manual preview
DIR-882
Brand: D-Link Pages: 62
REXROTH efc series Instruction Manual preview
efc series
Brand: REXROTH Pages: 68
mikroElektronika CAN SPI click Quick Start Manual preview
CAN SPI click
Brand: mikroElektronika Pages: 3
FOR-A MFR-4000 Operation Manual preview
MFR-4000
Brand: FOR-A Pages: 72
NXP Semiconductors TWR-SB0410-36EVB User Manual preview
TWR-SB0410-36EVB
Brand: NXP Semiconductors Pages: 26
APM AQ-500h Specification Sheet preview
AQ-500h
Brand: APM Pages: 3
Patton electronics 3040/V35 Installation And Operation Manual preview
3040/V35
Brand: Patton electronics Pages: 23
Xilica Audio Design XP 4080 User Manual preview
XP 4080
Brand: Xilica Audio Design Pages: 30
LogLogic LX 1010 Quick Start Manual preview
LX 1010
Brand: LogLogic Pages: 30
Mercusys MR30G Quick Installation Manual preview
MR30G
Brand: Mercusys Pages: 35

Brands by name

Popular brands

Load more brands