manualshive.com logo in svg

Dell PowerConnect W Airwave 7.1, User Manual

The Dell PowerConnect W Airwave 7.1 is a cutting-edge networking solution that enhances connectivity. Seamlessly manage your network with the comprehensive User Manual, available for free download on our website. Optimize your networking experience with this manual, crafted to provide in-depth instructions for maximizing the potential of your product.

Share
Download
background image

Dell PowerConnect W AirWave 7.1

  | User Guide

Performing Daily Administration in AWMS  |  

245

Viewing and Updating License Information with the Home > License Page

Navigate to the Home > License page using the standard AWMS menu. 

Figure 171

 illustrates this page, and 

Table 126

 describes the contents. 

Please be aware that you cannot enter multiple licenses. To combine multiple license entitlements into one 
new license, contact Dell support.

Figure 171  

Home > License

 Page Illustration

Table 126  

Home > License

 Fields  

Field

Description

System Name

Displays a user-definable name for AWMS (maximum 20 characters). The System Name can be 

configured from the AMP Setup > General page.

Organization

Displays the organization listed on your license key.

Hostname

Displays the DNS name assigned to AWMS.

IP Address

Displays the static IP address assigned to AWMS. The IP Address can be configured from the 

AMP Setup > Networking page.

Current Time

Displays the current date and time set on AWMS.

Uptime

Displays the amount of time since the operating system was last booted. 
AWMS processes get restarted daily as part of the nightly maintenance. 

Software Version

Displays the version number of AWMS code currently running.

Operating system

Displays the version of Linux installed on the server.

Summary of Contents for PowerConnect W Airwave 7.1















































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W Airwave 7.1

D-Link DES-1228/ME User Manual preview
DES-1228/ME
Brand: D-Link Pages: 267
QTech QSR-3920 Series Configuration Manual preview
QSR-3920 Series
Brand: QTech Pages: 120
QSC DSP-30 Hardware Manual preview
DSP-30
Brand: QSC Pages: 28
Teagle Tomahawk 7100 Operator'S Manual preview
Tomahawk 7100
Brand: Teagle Pages: 40
Idis DR-8432 Installation Manual preview
DR-8432
Brand: Idis Pages: 31
Patton electronics SMARTNODE 4552 Getting Started Manual preview
SMARTNODE 4552
Brand: Patton electronics Pages: 65
Delta Electronics Ethernet Communication Module DVPEN01-SL Manual preview
Ethernet Communication Module DVPEN01-SL
Brand: Delta Electronics Pages: 54
TP-Link tl-wr845n Quick Installation Manual preview
tl-wr845n
Brand: TP-Link Pages: 2
Accton Technology Fast SwitchHub-8mi SNMP Advanced Reference Manual preview
Fast SwitchHub-8mi SNMP
Brand: Accton Technology Pages: 13
Zoom B9.1ut Operation Manual preview
B9.1ut
Brand: Zoom Pages: 88
SAGEMCOM SE681 WiMAX User Manual preview
SE681 WiMAX
Brand: SAGEMCOM Pages: 75
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Brand: Paradyne Pages: 10
B&B Electronics 232PCC User Manual preview
232PCC
Brand: B&B Electronics Pages: 17
LevelOne FSW-0808TX Quick Start Manual preview
FSW-0808TX
Brand: LevelOne Pages: 3
Hawking H-CF30W Quick Installation Manual preview
H-CF30W
Brand: Hawking Pages: 21
ORiNG TGXPS-1080-M12-MV Series Quick Installation Manual preview
TGXPS-1080-M12-MV Series
Brand: ORiNG Pages: 2
swiftech MCW5000-64RH Installation Manual preview
MCW5000-64RH
Brand: swiftech Pages: 2
Cypress Semiconductor CY7C1441AV33 Specification Sheet preview
CY7C1441AV33
Brand: Cypress Semiconductor Pages: 31

Brands by name

Popular brands

Load more brands