manualshive.com logo in svg

Dell PowerConnect W Airwave 7.1, User Manual

The Dell PowerConnect W Airwave 7.1 is a cutting-edge networking solution that enhances connectivity. Seamlessly manage your network with the comprehensive User Manual, available for free download on our website. Optimize your networking experience with this manual, crafted to provide in-depth instructions for maximizing the potential of your product.

Share
Download
background image

Dell PowerConnect W AirWave 7.1

  | User Guide

Discovering, Adding, and Managing Devices  |  

153

Monitoring Data Specific to Wired Devices (Routers and Switches)

The monitoring page for routers and switches includes basic device information at the top, a bandwidth graph 
depicting the sum of all the physical interfaces, and beneath that, CPU/Memory usage graphs as shown in 

Figure 

99

.

Figure 99  

APs/Devices > Monitor 

Page for Wired Devices

All managed wired devices also include an 

Interfaces

 tab, as shown in 

Figure 100

.

Table 86  

APs/Devices > Monitor > Recent Events

 Fields and Default Values  

Field

Description

Time

Displays the day and time the event was recorded.

User

Displays the user that triggered the event. Configuration changes are logged as the AWMS user that submitted 

them. Automated AWMS events are logged as the System user. 

Event

Displays a short text description of the event.

Summary of Contents for PowerConnect W Airwave 7.1















































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W Airwave 7.1

National Instruments SCXI-1121 User Manual preview
SCXI-1121
Brand: National Instruments Pages: 162
Salus PL07 Instruction Manual preview
PL07
Brand: Salus Pages: 16
Commell ES-270 User Manual preview
ES-270
Brand: Commell Pages: 36
Oracle Talari E1000 Installation Manual preview
Talari E1000
Brand: Oracle Pages: 24
Allied Telesis AT-9424Ts/XP AC Datasheet preview
AT-9424Ts/XP AC
Brand: Allied Telesis Pages: 3
KEMP Technologies LoadMaster 1500 Installation And Configuration Manual preview
LoadMaster 1500
Brand: KEMP Technologies Pages: 71
IBA ibaFOB-4i-X Manual preview
ibaFOB-4i-X
Brand: IBA Pages: 33
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
RAIDAGE DAGE312UTL-NAS User Manual preview
DAGE312UTL-NAS
Brand: RAIDAGE Pages: 60
Adaptec AAA-130SA SERIES Installation And Hardware Manual preview
AAA-130SA SERIES
Brand: Adaptec Pages: 94
Supermicro Optane Persistent Memory 200 Series User Manual preview
Optane Persistent Memory 200 Series
Brand: Supermicro Pages: 54
Infoblox Trinzic 100 Installation Manual preview
Trinzic 100
Brand: Infoblox Pages: 13
Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual preview
HIRESCHMANN IT MAMMUTHUS MTM8003-FAN
Brand: Belden Pages: 84
OWC Mercury FireWire 400 Owner'S Manual preview
Mercury FireWire 400
Brand: OWC Pages: 2
TP-Link Deco XE200 User Manual preview
Deco XE200
Brand: TP-Link Pages: 57
3Com FEM656C Quick Start Manual preview
FEM656C
Brand: 3Com Pages: 53
iNetVu Tachyon CI1300 Quick Start Manual preview
Tachyon CI1300
Brand: iNetVu Pages: 20
IEI Technology Mustang-M2AE-MX1 User Manual preview
Mustang-M2AE-MX1
Brand: IEI Technology Pages: 58

Brands by name

Popular brands

Load more brands