manualshive.com logo in svg

Dell PowerConnect W Airwave 7.1, User Manual

The Dell PowerConnect W Airwave 7.1 is a cutting-edge networking solution that enhances connectivity. Seamlessly manage your network with the comprehensive User Manual, available for free download on our website. Optimize your networking experience with this manual, crafted to provide in-depth instructions for maximizing the potential of your product.

Share
Download
background image

Dell PowerConnect W AirWave 7.1

  | User Guide

Creating, Running, and Emailing Reports  |  

265

The 

Generated Reports 

page contains less columns and information than the 

Definitions

 page. 

Table 134

 

describes each column for the 

Reports > Generated

 page. 

Using Custom Reports

Custom reports allow users to specify the data that should be included in a report and how it should be displayed.

Perform these steps to create a 

Custom Report

.

1. Navigate to the 

Reports > Definitions 

page.

2. Click the 

Add

 button.

3. Select 

Custom 

in the type dropdown. The 

Custom Options 

section will open up as shown in 

Figure 184

.

Figure 184  

AWMS Custom Options 

Page

The left pane of the 

Custom Options

 window lists all available data that can be included in the report. The data 

is broken down by report. If for example, the data you want to include is in the Inventory report, click 

Inventory

 

to view a list of all available inventory information. Then, simply drag the desired data from the 

Available 

Options

 list on the left to the 

Selected Options

 pane on the right. The order of the data in the 

Selected Options

 

section is the order that it will appear in the report. The data can be reordered by dragging an item up or down the 
list.

Table 134  

Report > Definition

 Page Fields and Descriptions

Field

Description

Generated Time

Displays the date and time of the last time the report was run, or when the latest report is available. Clicking 

the link in this field displays the latest version of a given report. When the latest version of a given report is 

not available, this field is blank. In this case, a report can be run by selecting the report title and clicking Run. 

Title

Displays title of the report. This is a user-configured field when creating the report.

Type

Displays the type of the report. This can be one of 13 report types in AWMS.

Subject

Displays the scope of the report, to include groups, folders, SSIDs, or any combination of these that are 

included in the report.

Report Start

Displays the beginning of the time period covered in the report.

Report End

Displays the end of the time period covered in the report.

Role

Added to the Reports definitions for other roles section, this column cites the roles for which additional 

reports are defined.

Summary of Contents for PowerConnect W Airwave 7.1















































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W Airwave 7.1

Hal Communications RS2100 Instruction Manual preview
RS2100
Brand: Hal Communications Pages: 25
Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Brand: Lab.gruppen Pages: 35
Aleratec 310108 Quick Start Manual preview
310108
Brand: Aleratec Pages: 12
ROE EVISON HD101 User Manual preview
EVISON HD101
Brand: ROE Pages: 41
HMS Networks Anybus Communicator ABC4021 User Manual preview
Anybus Communicator ABC4021
Brand: HMS Networks Pages: 60
Altera Nios II Hardware Development Manual preview
Nios II
Brand: Altera Pages: 42
red lion Yaskawa 2000 Information Sheet preview
Yaskawa 2000
Brand: red lion Pages: 5
IBM System Storage DS3200 Overview preview
System Storage DS3200
Brand: IBM Pages: 2
TP-Link TD-8816 Quick Installation Manual preview
TD-8816
Brand: TP-Link Pages: 2
FabiaTech Low Power Series User Manual preview
Low Power Series
Brand: FabiaTech Pages: 77
Cowfish Technologies VanConnect User Manual And Installation Manual preview
VanConnect
Brand: Cowfish Technologies Pages: 38
B&B Electronics EIR208 Series Quick Start Manual preview
EIR208 Series
Brand: B&B Electronics Pages: 2
MSNswitch UIS-322b Quick Installation Manual preview
UIS-322b
Brand: MSNswitch Pages: 2
Concept Pro DEEP LEARNING PLUS Quick Start Manual preview
DEEP LEARNING PLUS
Brand: Concept Pro Pages: 28
Aaeon FWS-7150 Manual preview
FWS-7150
Brand: Aaeon Pages: 57
Juniper NSM4000 Hardware Manual preview
NSM4000
Brand: Juniper Pages: 196
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24
Idis DR-2308P Quick Manual preview
DR-2308P
Brand: Idis Pages: 18

Brands by name

Popular brands

Load more brands