manualshive.com logo in svg

Dell PowerConnect W Airwave 7.1, User Manual

The Dell PowerConnect W Airwave 7.1 is a cutting-edge networking solution that enhances connectivity. Seamlessly manage your network with the comprehensive User Manual, available for free download on our website. Optimize your networking experience with this manual, crafted to provide in-depth instructions for maximizing the potential of your product.

Share
Download
background image

264

  |  Creating, Running, and Emailing Reports

Dell PowerConnect W AirWave 7.1

  | User Guide

Figure 182  

Reports > Generated

 Page Example

Figure 183  

Reports > Generated

 Page with Single-click Report Viewing Options

Using Daily Reports

This section describes the reports supported in AWMS. These reports can be accessed from the bottom of the 

Reports > Generated

 page, and are presented in alphabetical order as follows in 

Table 134

:

Viewing Generated Reports

To display all generated reports that are currently scheduled on AWMS, navigate to the 

Reports > Generated 

page. 

Figure 182

 and 

Figure 183

 illustrate this page. This page supports the following general viewing options:

By default, the reports on the 

Reports > Generated 

page are sorted by 

Generation Time. You can sort 

reports 

by any other category (column header) in sequential or reverse sequential order.

Click a report title to view details for each scheduled report. Click 

Add

 to create new generated reports. 

Generated reports are scheduled and custom configurable.

Scroll to the bottom of the 

Reports > Generated

 page, and click any of the 13 report types to view the most 

recent version of any report. This function is independent of scheduled reports.

The 

Reports > Detail 

page launches when you click any report title from this page. The content of the 

Reports > Detail 

page varies significantly according to the report type. 

Note:  Clicking any report from the list shown in 

Figure 183

 displays the 

Detail

 page for the most recent version of that report.

Summary of Contents for PowerConnect W Airwave 7.1















































































































































































































































































































































Reviews:

No comments

Related manuals for PowerConnect W Airwave 7.1

D-Link DSL-500 Quick Start Manual preview
DSL-500
Brand: D-Link Pages: 11
D-Link DHP?P309AV Setup Manual preview
DHP?P309AV
Brand: D-Link Pages: 8
D-Link AirPlus DWL-810 Quick Installation Manual preview
AirPlus DWL-810
Brand: D-Link Pages: 8
D-Link DFE-690TXD Quick Install Manual preview
DFE-690TXD
Brand: D-Link Pages: 12
D-Link DHP-601AV Quick Installation Manual preview
DHP-601AV
Brand: D-Link Pages: 84
Omnia 11 Installation And Operation Manual preview
11
Brand: Omnia Pages: 102
ICP DAS USA ET-7000 series Quick Start Manual preview
ET-7000 series
Brand: ICP DAS USA Pages: 14
ICP DAS USA I-2533 User Manual preview
I-2533
Brand: ICP DAS USA Pages: 25
ICP DAS USA ET-2200 Series Manual preview
ET-2200 Series
Brand: ICP DAS USA Pages: 15
ICP DAS USA PCIe-S112 Quick Start Manual preview
PCIe-S112
Brand: ICP DAS USA Pages: 8
ICP ZT-2550 Quick Start Manual preview
ZT-2550
Brand: ICP Pages: 14
Lab.gruppen NLB 60E Operation Manual preview
NLB 60E
Brand: Lab.gruppen Pages: 35
XMOS xCORE-200 Multi-channel Audio board Design Manual preview
xCORE-200 Multi-channel Audio board
Brand: XMOS Pages: 112
Freescale Semiconductor MCF54455 Reference Manual preview
MCF54455
Brand: Freescale Semiconductor Pages: 921
BSD Networks bsg-0800t User Manual preview
bsg-0800t
Brand: BSD Networks Pages: 7
Lancom 7100 VPN Manual preview
7100 VPN
Brand: Lancom Pages: 70
Patton electronics SMARTNODE 4950 Quick Start Manual preview
SMARTNODE 4950
Brand: Patton electronics Pages: 12
addlink SPIDER N4 Installation Manual preview
SPIDER N4
Brand: addlink Pages: 9

Brands by name

Popular brands

Load more brands