Dell PowerConnect 7024, Manual

Page: 481 / 1234

Configuring a Captive Portal
481
Detailed Configuration Procedures
Use the following steps to perform the Captive Portal configuration:
1. Configure the RADIUS server information on the switch.
In this example, the RADIUS server IP address is 192.168.2.188, and the
RADIUS server name is luxury-radius.
console# configure
console(config)# radius-server host 192.168.12.182
console(Config-auth-radius)# name luxury-radius
console(Config-auth-radius)# exit
2.
Configure the Captive Portal groups.
console(config)# captive-portal
console(config-CP)# user group 2 name Conference
console(config-CP)# user group 3 name Employee
console(config-CP)# exit
3. Configure the Guest Captive Portal.
console(config)# captive-portal
console(config-CP)# configuration 2
console(config-CP 2)#
name Guest
console(config-CP 2)# redirect
console(config-CP 2)# redirect-url
http://www.luxuryresorturl.com
console(config-CP 2)# interface gi1/0/1
console(config-CP 2)# interface gi1/0/2
...
console(config-CP 2)# interface gi1/0/4
console(config-CP 2)# exit
4.
Configure the Conference Captive Portal.
console(config-CP)# configuration 3
console(config-CP 3)# name Conference
console(config-CP 3)# verification local
console(config-CP 3)# group 2
console(config-CP 4)# interface gi1/0/25
...
console(config-CP 4)# interface gi1/0/33
console(config-CP 3)# exit