Dell PowerConnect 7024, Manual

Page: 996 / 1234

996
Configuring OSPF and OSPFv3
console(config)# ipv6 route 3000:44:44::/64
3000:2:3::210:18ff:fe82:c14
console(config)# ip route 10.23.67.0 255.255.255.0
10.2.3.3
2 Create VLANs 5, 10, and 17.
console(config)# vlan 5,10,17
3 On VLANs 5, 10, and 17, configure IPv4 and IPv6 addresses and enable
OSPFv3. For IPv6, associate VLAN 5 with Area 0, VLAN 10 with Area 1,
and VLAN 17 with Area 2.
console(config)# interface vlan 5
console(config-if-vlan5)# ip address 10.2.3.2
255.255.255.0
console(config-if-vlan5)# ipv6 address
3000:2:3::/64 eui64
console(config-if-vlan5)# ipv6 ospf
console(config-if-vlan5) #ipv6 ospf areaid 0
console(config-if-vlan5)# exit
console(config)# interface vlan 10
console(config-if-vlan10)# ip address 10.1.2.2
255.255.255.0
console(config-if-vlan10)#
ipv6 address
3000:1:2::/64 eui64
console(config-if-vlan10)# ipv6 ospf
console(config-if-vlan10)# ipv6 ospf areaid 1
console(config-if-vlan10)# exit
console(config)# interface vlan 17
console(config-if-vlan17)# ip address 10.2.4.2
255.255.255.0
console(config-if-vlan17)# ipv6 address
3000:2:4::/64 eui64
console(config-if-vlan17)# ipv6 ospf
console(config-if-vlan17)# ipv6 ospf areaid 2
console(config-if-vlan17)# exit
4 For IPv4: Configure the router ID, define an OSPF router, and define Area
1 as a stub., and define Area 2 as an NSSA.
console(config)#r outer ospf
console(config-router)# router-id 2.2.2.2