
Managing IPv4 and IPv6 Multicast
1213
console(config-vlan)#
vlan 10,20
2
While in VLAN Database mode, enable IGMP snooping on the VLANs.
console(config-vlan)#
ip igmp snooping 10
console(config-vlan)#
ip igmp snooping 20
console(config-vlan)#
exit
3
Configure port 23 and 24 as trunk ports.
console(config)#
interface gi1/0/23
console(config-if-Gi1/0/23)#
switchport mode trunk
console(config-if-Gi1/0/23)#
switchport trunk
allowed vlan add 20
console(config-if-Gi1/0/23)#
exit
console(config)#
interface gi1/0/24
console(config-if-Gi1/0/24)#
switchport mode trunk
console(config-if-Gi1/0/24)#
switchport trunk
allowed vlan add 10
console(config-if-Gi1/0/24)#
exit
4
Enable routing on the switch and configure the OSPF router ID.
console(config)#
ip routing
console(config)#
router ospf
console(config-router)#
router-id 3.3.1.1
console(config-router)#
exit
5
Configure VLAN 10 as a VLAN routing interface and specify the OSPF
area. When you assign an IP address to the VLAN, routing is automatically
enabled.
console(config)#
interface vlan 10
console(config-if-vlan10)#
ip address 192.168.10.4
255.255.255.0
console(config-if-vlan10)#
ip ospf area 0
6
Enable IGMPv2 and PIM-SM on the VLAN routing interface.
console(config-if-vlan10)#
ip igmp
console(config-if-vlan10)#
ip igmp version 2
console(config-if-vlan10)#
ip pim
console(config-if-vlan10)#
exit
Summary of Contents for PowerConnect 7024
