Problems writing to a CD/DVD-RW drive
Hard drive problems
E-Mail, Modem, and Internet Problems
NOTE:
Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives.
Adjust the Windows volume control —
l
Click the speaker icon in the lower-right corner of your screen.
l
Ensure that the volume is turned up by clicking the slidebar and dragging it up.
l
Ensure that the sound is not muted by clicking any boxes that are checked.
Check the speakers and subwoofer —
See
Sound and Speaker Problems
.
Close other programs —
The CD/DVD-RW drive must receive a steady stream of data when writing. If the stream is interrupted, an error
occurs. Try closing all programs before you write to the CD/DVD-RW.
Turn off Standby mode in Windows before writing to a CD/DVD-
RW disc —
See your computer documentation for information on Power
Management modes. See
Advanced Features
.
Run Check Disk —
1.
Click the
Start
button and click
My Computer
.
2.
Right-click
Local Disk C:
.
3.
Click
Properties
.
4.
Click the
Tools
tab.
5.
Under
Error-checking
, click
Check Now
.
6.
Click
Scan for and attempt recovery of bad sectors
.
7.
Click
Start
.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.
NOTE:
Connect the modem to an analog telephone jack only. The modem does not operate while it is connected to a digital telephone network.
Run the Modem Helper diagnostics —
Click the
Start
button, point to
All
Programs
, and then click
Modem Helper
. Follow the instructions
on the screen to identify and resolve modem problems. (Modem Helper is not available on all computers.)
Verify that the modem is communicating with Windows —
1.
Click the
Start
button and click
Control Panel
.
2.
Click
Printers and Other Hardware
.
3.
Click
Phone and Modem Options
.
4.
Click the
Modems
tab.
5.
Click the COM port for your modem.
6.
Click
Properties
, click the
Diagnostics
tab, and then click
Query Modem
to verify that the modem is communicating with Windows.
If all commands receive responses, the modem is operating properly.
Ensure that you are connected to the Internet —
Ensure that you have subscribed to an Internet provider. With the Outlook Express e-
mail program open, click
File
. If
Work Offline
has a checkmark next to it, click the checkmark to remove it and connect to the Internet. For
help, contact your Internet service provider.
Summary of Contents for OptiPlex 745c
Page 105: ...Back to Contents Page ...