Dell OptiPlex 745c User Manual Download Page 84

Page: 84 / 120

Connect the network cable to the network adapter connector on the back of your computer.

Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.

Connect the other end of the network cable to a network device.

Network Setup Wizard

The Microsoft

Windows

XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet

connection between computers in a home or small office.

Click the

Start

button, point to

All Programs

Accessories

Communications

, and then click

Network Setup Wizard

On the

Network Setup Wizard

welcome screen, click

Next

Click

Checklist for creating a network

Complete the checklist and required preparations.

Return to the Network Setup Wizard and follow the instructions on the screen.

Back to Contents Page

NOTE:

Selecting the connection method

This computer connects directly to the Internet

enables the integrated firewall provided with Windows XP

Service Pack 1 (SP1) or later.

Summary of Contents for OptiPlex 745c

























































































































Search results

Summary of Contents for OptiPlex 745c

Reviews:

Dell OptiPlex 745c, User Manual, Page: 84 / 120

Search results

Summary of Contents for OptiPlex 745c

Reviews: