Dell OptiPlex 745c User Manual Download Page 69

Page: 69 / 120

Installing an Optical Drive

Follow the procedures in

Before You Begin

If you are replacing an optical drive, remove the shoulder screws from the existing drive and attach the screws to the replacement drive.

If you are installing a new optical drive, remove the drive-panel insert for your new drive, remove the shoulder screws from the inside of the drive-panel
insert, and attach the screws to the new drive.

Check the documentation that accompanied the drive to verify that the drive is configured for your computer.

Align the shoulder screws on the optical drive with the shoulder screw slots, and slide the drive into the bay until it clicks into place.

optical drive

drive release latch

optical drive

shoulder screws (3)

shoulder screw slots (2)

Summary of Contents for OptiPlex 745c

























































































































Search results

Summary of Contents for OptiPlex 745c

Reviews:

Related manuals for OptiPlex 745c

Brands by name

Popular brands

Dell OptiPlex 745c, User Manual

Search results

Summary of Contents for OptiPlex 745c

Reviews:

Related manuals for OptiPlex 745c

Brands by name

Popular brands