Dell Inspiron 4150 User Manual Download Page 12

Page: 12 / 163

A Tour of Your Computer: Dell Inspiron 4150

Fan —

The computer uses an internal fan to create airflow through the vents, which prevents

the computer from overheating.

Serial Connector

Connects serial devices, such as a mouse or handheld device.

Parallel Connector

Connects a parallel device, such as a printer. You can also

connect the optional floppy drive directly to the parallel connector

using the optional floppy drive cable.

Docking Connector

HINT:

Docking devices may not be available in some countries.

Connects the optional docking device. A docking device allows you

to easily use external devices with your computer, such as an

external keyboard, mouse, and monitor.

See the documentation that came with your docking device for

additional information.

file:///F|/Service%20Manuals/Dell/Inspiron/4150/tour.htm (11 of 14) [2/28/2004 7:28:05 AM]

Summary of Contents for Inspiron 4150




































































































































































Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands

Dell Inspiron 4150, User Manual

Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands