Dell Inspiron 4150 User Manual Download Page 149

Page: 149 / 163

Hybrid Cooling Fan: Dell Inspiron 4150

Back to Contents Page

Hybrid Cooling Fan

Dell™ Inspiron™ 4150

Removing the Hybrid Cooling Fan

NOTICE:

Disconnect the computer and any attached devices from electrical

outlets, and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by

touching an unpainted metal surface on the computer.

NOTICE:

Read "

Preparing to Work Inside the Computer

" before performing the

following procedure.

1. Remove the

hard drive

2. Remove the

keyboard

3. Remove the

display

4. Remove the

palm rest

5. Remove the

microprocessor thermal cooling assembly

6. Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure

the hybrid cooling fan to the system board.

file:///F|/Service%20Manuals/Dell/Inspiron/4150/fan.htm (1 of 3) [2/28/2004 7:29:47 AM]

Summary of Contents for Inspiron 4150




































































































































































Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands

Dell Inspiron 4150, User Manual

Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands