Dell Inspiron 4150 User Manual Download Page 124

Page: 124 / 163

Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiron 4150

Back to Contents Page

Display, Display Assembly, Display

Latch, and Hinge Covers

Dell™ Inspiron™ 4150

Display

Display Assembly

Display Latch

Hinge Covers

Display

NOTICE:

You must remove the display before you remove the palm rest.

NOTICE:

Disconnect the computer and any attached devices from electrical

outlets, and remove any installed batteries.

NOTICE:

To avoid ESD, ground yourself by using a wrist grounding strap or by

touching an unpainted metal surface on the computer.

NOTICE:

Read "

Preparing to Work Inside the Computer

" before performing the

following procedure.

file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (1 of 13) [2/28/2004 7:29:44 AM]

Summary of Contents for Inspiron 4150




































































































































































Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands

Dell Inspiron 4150, User Manual

Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands