Display, Display Assembly, Display Latch, and Hinge Covers: Dell Inspiron 4150
4 top cover
8 display panel
Removing the Display Bezel
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE:
Read "
Preparing to Work Inside the Computer
" before performing the
following procedure.
1. Remove the
hard drive
.
2. Remove the
display
.
3. Use a plastic scribe to pry the four rubber screw covers out of the screw holes
located on the front of the bezel.
4. Remove the four M2.5 x 5-mm screws located on the front of the bezel.
NOTICE:
Carefully separate the bezel from the top cover to avoid damage to
the bezel.
5. Starting at the bottom of the display panel (by the DELL™ logo), use your
fingers to separate the bezel from the top cover by lifting up the inside of the
bezel while pushing in on the outside.
Removing the Display Panel
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
file:///F|/Service%20Manuals/Dell/Inspiron/4150/display.htm (6 of 13) [2/28/2004 7:29:44 AM]
