Dell Inspiron 4150 User Manual Download Page 103

Page: 103 / 163

Palm Rest and Display Cover Inserts: Dell Inspiron 4150

Back to Contents Page

Palm Rest and Display Cover Inserts

Dell™ Inspiron™ 4150

Palm Rests

Display Cover

Palm Rests

HINT:

Complete instructions for installing the palm rests are included with the

optional color inserts.

1. Save and close any open files, exit any open programs, and shut down the

computer.

2. If the computer is connected to a docking device (docked), undock it. See the

documentation that came with your docking device for instructions.

3. Keep the display open and tilt the computer back so that you can access the

bottom of the computer.

4. Slide and hold the latch release on the left side, and remove any device installed

in the module bay.

5. Slide and hold the latch release on the right side, and remove any battery

installed in the battery bay.

6. Locate the orange palm rest removal buttons. Firmly press the buttons with the

eraser end of a pencil (or a dull utensil smaller than your finger) to release the

palm rests.

file:///F|/Service%20Manuals/Dell/Inspiron/4150/inserts.htm (1 of 4) [2/28/2004 7:29:40 AM]

Summary of Contents for Inspiron 4150




































































































































































Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands

Dell Inspiron 4150, User Manual

Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands