Dell Inspiron 4150 User Manual Download Page 93

Page: 93 / 163

System Board: Dell Inspiron 4150

1 M2.5 x. 5-mm screw (1)

11. Remove the

speaker assemblies

from the bottom case.

12. Pull the right side of the bottom case, next to the external headphone and

microphone connectors, away from the system board as you simultaneously lift

the front of the system board out and away from the bottom case.

Replacing the System Board

1. Install the

microprocessor

on the replacement system board.

2. Install the replacement system board:

a. Insert the external microphone and headphone connectors through the

file:///F|/Service%20Manuals/Dell/Inspiron/4150/sysboard.htm (3 of 4) [2/28/2004 7:29:13 AM]

Summary of Contents for Inspiron 4150




































































































































































Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands

Dell Inspiron 4150, User Manual

Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands