Dell Inspiron 4150 User Manual Download Page 94

Page: 94 / 163

System Board: Dell Inspiron 4150

bottom case.

b. Replace the six M2.5 x 5-mm screws, starting on the right side of the

bottom case.

c. Replace the fan guard, inserting the tab into the bottom case, and replace

the three M2.5 x 5-mm screws. Replacing the screw opposite the tab first

makes it easier to insert and replace the other two screws.

3. Install the modem and the microprocessor thermal cooling assembly that you

removed from the old system board.

HINT:

Route cables so that they are not crimped or pinched when the complete

assembly is put back together.

4. Connect the right and left

speaker assemblies

that came with the new system

board in the bottom case.

5. Replace the palm rest, the keyboard, the display, and the hard drive.

6. Replace the module bay devices and any PC Cards or plastic blanks in the PC

Card slot.

7. Insert the CD that accompanied the replacement system board into the drive,

and turn on the computer. Follow the instructions on the screen.

HINT:

After installing the system board, enter the computer service tag

sequence into the BIOS of the replacement system board.

Back to Contents Page

file:///F|/Service%20Manuals/Dell/Inspiron/4150/sysboard.htm (4 of 4) [2/28/2004 7:29:13 AM]

Summary of Contents for Inspiron 4150




































































































































































Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands

Dell Inspiron 4150, User Manual

Search results

Summary of Contents for Inspiron 4150

Reviews:

Related manuals for Inspiron 4150

Brands by name

Popular brands