Dell Inspiron 3700 Reference Manual Download

Page: 45 / 185

Back to Contents Page

Documentation:

Dell™ Inspiron™ 3700 System Reference

Printed Documentation

To save PDF files (files with an extension of

.pdf

) to your hard-disk drive, right-click the document title, click

Save Target As

in Microsoft

Internet

Explorer or

Save Link As

in Netscape Navigator, and specify a location on your hard-disk drive.

Right-click only

the following links:

Getting Started

sheet

(.pdf) (1007 KB)

Dell Inspiron Systems Setup Guide

(.pdf) (253 KB)

Dell Inspiron 3700 Reference and Troubleshooting Guide

(.pdf) (2544 KB)

Dell

Inspiron 3700 Advanced Port Replicator User's Guide

(.pdf) (927 KB)

Online Documentation

Downloading the Help and Associated Files

Right-click the following link to the

popup.ocx

file:

popup.ocx

Click

Save Target As

in Microsoft Internet Explorer or

Save Link As

in Netscape Navigator, and specify

c:\windows\system

on your

hard-disk drive.

Click the

Start

button on the Microsoft Windows

desktop, and then click

Run

Type

regsvr32 popup.ocx

and then press <Enter>.

Click

when the installation is complete.

Right-click the following link to the

Help

file:

Dell Inspiron 3700 System Help

(.chm) (3165 KB)

Click

Save Target As

in Microsoft Internet Explorer or

Save Link As

in Netscape Navigator, and specify a location on your hard-disk drive.

Viewing the

Help

File

To view the

Help

file, perform the following steps:

Click the

Start

button on the Windows desktop, point to

Programs

, and then click

Windows Explorer

Navigate to the directory in which you saved the

Help

file.

Double-click the file (

3700Help.chm

Back to Contents Page

Printed Documentation

Online Documentation

You must right-click the link for a portable document format (PDF) file and save the file to your hard-disk drive.
Attempting to open large PDF files through your browser causes your system to freeze.

NOTES: PDF files require Adobe™ Acrobat Reader, which can be downloaded from the Adobe World Wide Web site.

To view a PDF file, launch Acrobat Reader. Click

File

–

Open

and select the PDF file.

Compiled HTML

Help

files (files with an extension of .chm) require Microsoft Internet Explorer 4.0 or later.

Summary of Contents for Inspiron 3700


























































































































































































Search results

Summary of Contents for Inspiron 3700

Reviews:

Related manuals for Inspiron 3700

Brands by name

Popular brands

Dell Inspiron 3700, Reference Manual

Search results

Summary of Contents for Inspiron 3700

Reviews:

Related manuals for Inspiron 3700

Brands by name

Popular brands