Dell Inspiron 3700 Reference Manual Download

Page: 184 / 185

Installing the Audio Drivers

Dell provides audio drivers so that you can customize the sound features of your computer.

To install the audio drivers, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the

installation.

2. Insert the

System Software

CD into the CD-ROM drive.

Double-click the

My Computer

icon.

Double-click the

CD-ROM

drive icon.

Double-click the

Nt4

folder.

Double-click the

Audio

folder.

Double-click the

folder, where

is the video driver revision.

Double-click the

setup.exe

file.

Follow the instructions on your display.

10. After the files are copied to your hard-disk drive, click

Finish

to restart your computer.

Installing the Dell DualPoint™ Integrated Pointing Device Drivers

DualPoint integrated pointing device drivers allow you to use and customize the integrated touch pad, the track stick, or an external mouse. To
install these drivers, perform the following steps:

1. Save your work in all open application programs, because you will need to restart your computer at the end of this procedure to complete the

installation.

2. Insert the

System Software

CD into the CD-ROM drive.

Double-click the

My Computer

icon.

Double-click the

CD-ROM

drive icon.

Double-click the

Nt4

folder.

Double-click the

Touchpad

folder.

Double-click the

folder, where

is the video driver revision.

Double-click the

setup.exe

file.

Follow the instructions on your display.

10. After the files are copied to your hard-disk drive, click

Finish

to restart your computer.

Installing the System Help

The Dell Inspiron system

Help

is available on the

System Software

CD. You can also access it from Dell

’

s Support Web site

(

http://support.dell.com

Installing Help From the CD

To install the system

Help

from the

System Software

CD, perform the following steps:

1. Insert the CD into the CD-ROM drive.

2. Double-click the

My Computer

icon, and then double-click the

CD-ROM

drive icon.

NOTE: You must install Microsoft Internet Explorer 4.01 from the Microsoft Windows NT 4.0 Service Pack 5 CD prior to
installing the system Help.

Summary of Contents for Inspiron 3700


























































































































































































Search results

Summary of Contents for Inspiron 3700

Reviews:

Related manuals for Inspiron 3700

Brands by name

Popular brands

Dell Inspiron 3700, Reference Manual

Search results

Summary of Contents for Inspiron 3700

Reviews:

Related manuals for Inspiron 3700

Brands by name

Popular brands