Dell Inspiron 3700 Reference Manual Download

Page: 27 / 185

Americas Contact Numbers

001

001

352

—

Macau

—

853

Not required

(Amsterdam)

—

095

Not required

Poland

(Warsaw)

011

Singapore

(Singapore)

005

Not required

09/091

(Madrid)

(Upplands Vasby)

009

Switzerland

(Geneva)

Taiwan

002

886

—

Thailand

001

—

U.K.

(Bracknell)

010

1344

U.S.A.

(Austin, Texas)

011

Not required

Country (City)

Department Name or Service

Area

Code

Local Number or

Toll-Free Number

Canada

(North York,
Ontario)

NOTE:
Customers in
Canada call the
U.S.A. for access
to TechConnect
BBS.

Automated Order-Status System

toll free: 1-800-433-9014

AutoTech (Automated technical support)

toll free: 1-800-247-9362

Customer Care (From outside Toronto)

toll free: 1-800-387-5759

Customer Care (From within Toronto)

416

758-2400

Customer Technical Support

toll free: 1-800-847-4096

Sales (Direct Sales

—

from outside Toronto)

toll free: 1-800-387-5752

Sales (Direct Sales

—

from within Toronto)

416

758-2200

Sales (Federal government, education, and
medical)

toll free: 1-800-567-7542

Sales (Major Accounts)

toll free: 1-800-387-5755

TechConnect BBS (Austin, Texas, U.S.A.)

512

728-8528

TechFax

toll free: 1-800-950-1329

Chile

(Santiago)

NOTE:
Customers in
Chile call the
U.S.A. for sales,
customer, and
technical
assistance

Sales, Customer Support, and Technical Support

toll free: 1230-020-4823

Latin America

NOTE:
Customers in
Latin America
call the U.S.A. for
sales, customer,
and technical

Customer Technical Support (Austin, Texas,
U.S.A.)

512

728-4093

Customer Service (Austin, Texas, U.S.A.)

512

728-3619

Fax (Technical Support and Customer Service)
(Austin, Texas, U.S.A.)

512

728-3883

Sales (Austin, Texas, U.S.A.)

512

728-4397

Summary of Contents for Inspiron 3700


























































































































































































Search results

Summary of Contents for Inspiron 3700

Reviews:

Related manuals for Inspiron 3700

Brands by name

Popular brands

Dell Inspiron 3700, Reference Manual

Search results

Summary of Contents for Inspiron 3700

Reviews:

Related manuals for Inspiron 3700

Brands by name

Popular brands