Dell Force10 TeraScale C Series, Reference Manual

Page: 700 / 1640

700 | IPv6 Access Control Lists (IPv6 ACLs)
www.dell.com | support.dell.com
remark
c e s
Enter a description for an IPv6 ACL entry.
Syntax remark remark number [ description ]
To delete the description, use the no remark remark number command (it is not necessary to
include the remark description that you are deleting).
Parameters
Defaults Not configured
Command Modes ACCESS-LIST
Command
History
Example Figure 25-2. Command Example: remark
Usage
Information
As shown in the example above, the same sequence number is used for the remark and an ACL rule.
The remark will precede the rule in the running-configuration because it is assumed that the remark is
for that rule or that group of rules that follow the remark. You can configure up to 4294967290
remarks in a given ACL.
Related
Commands
remark number Enter the remark number. Note that the same sequence number can be used
for the remark and an ACL rule.
Range: 0 to 4294967290
description
Enter a description of up to 80 characters.
Version 8.4.2.1 Introduced on the S-Series
Version 8.2.1.0 Introduced on the E-Series ExaScale
Version 7.8.1.0 Introduced on the C-Series
Version 7.4.1.0 Introduced on the E-Series TeraScale
FTOS(config-ipv6-acl)# remark 10 Remark for Entry # 10
FTOS(config-ipv6-acl)#show config
!
ipv6 access-list Acl1
description IPV6 Access-list
seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes
remark 10 Remark for Entry # 10
seq 10 permit icmp host 3333:: any mobile-advertisement log
seq 15 deny tcp any any rst
seq 20 permit udp any any gt 100 count
!FTOS(config-ipv6-acl)#
show config Display the current ACL configuration.