Dell Force10 TeraScale C Series, Reference Manual

Page: 802 / 1640

802 | IPv6 Border Gateway Protocol (IPv6 BGP)
www.dell.com | support.dell.com
Usage
Information
By default, when a neighbor/peer group configuration is created in the Router BGP context, it is
enabled for the IPv6/Unicast AFI/SAFI. By using
activate
in the new context, the neighbor/peer
group is enabled for AFI/SAFI.
Related
Commands
neighbor advertisement-interval
c e
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Syntax neighbor { ipv6-address | peer-group-name } advertisement-interval seconds
To return to the default value, use the no neighbor { ipv6-address | peer-group-name }
advertisement-interval command.
Parameters
Defaults seconds
= 5 seconds (internal peers);
seconds
= 30 seconds (external peers)
Command Modes
ROUTER BGPV6-ADDRESS FAMILY
Command
History
=
neighbor default-originate
c e
Inject the default route to a BGP peer or neighbor.
Syntax
neighbor
{
ipv6-address
|
peer-group-name
}
default-originate
[
route-map map-name
]
To remove a default route, use the
no neighbor
{
ipv6-address
|
peer-group-name
}
default-originate
command.
Parameters
address family Changes the context to SAFI
ipv6-address
(OPTIONAL) Enter the IPv6 address in the
x:x:x:x::x
format.
The
::
notation specifies successive hexadecimal fields of zeros.
peer-group-name
Enter the name of the peer group to set the advertisement interval for all routers
in the peer group.
seconds
Enter a number as the time interval, in seconds, between BGP advertisements.
Range: 0 to 600 seconds.
Default: 5 seconds for internal BGP peers; 30 seconds for external BGP peers.
Version 8.4.2.1 Introduced on C-Series and S4810.
Version 7.4.1.0 Introduced on E-Series TeraScale
ipv6-address
(OPTIONAL) Enter the IPv6 address in the
x:x:x:x::x
format.
The
::
notation specifies successive hexadecimal fields of zeros.
peer-group-name Enter the name of the peer group to set the default route of all routers in that peer
group.
route-map
map-name
(OPTIONAL) Enter the keyword
route-map
followed by the name of a
configured route map.