manualshive.com logo in svg

Dell Force10 TeraScale C Series, Reference Manual

Share
Download
Dell Force10 TeraScale C Series Reference Manual Download Page 736

736

|

IPv6 Border Gateway Protocol (IPv6 BGP)

www.dell.com | support.dell.com

Command

History

.

Usage

Information

Enter ipv6 unicast to enter the BGP for IPv6 mode (CONF-ROUTER_BGPv6_AF).

aggregate-address

c e 

Summarize a range of prefixes to minimize the number of entries in the routing table.

Syntax

aggregate-address

 

ipv6-address prefix-length

 [

advertise-map

 

map-name

] [

as-set

] 

[

attribute-map

 

map-name

] [

summary-only

] [

suppress-map

 

map-name

] 

Parameters

 

Defaults

Not configured.

Command Modes

CONFIGURATION-ROUTER-BGPV6-ADDRESS FAMILY

Command

History

Usage

Information

At least one of the routes included in the aggregate address must be in the BGP routing table for the 
configured aggregate to become active.

Do not add the 

as-set

 parameter to the aggregate, if routes within the aggregate are constantly 

changing as the aggregate will flap to keep track of the changes in the AS_PATH. 

Version 8.4.2.1

Introduced on C-Series and S4810.

Version 6.5.1.0

Introduced on E-Series TeraScale

ipv6-address 
prefix-length

Enter the IPv6 address in the 

x:x:x:x::x

 format followed by the prefix length in the 

/x

 format. 

Range: /0 to /128

The

 

::

 notation specifies successive hexadecimal fields of zeros

advertise-map

 

map-name

(OPTIONAL) Enter the keywords 

advertise-map

 followed by the name of a 

configured route map to set filters for advertising an aggregate route.

as-set

(OPTIONAL) Enter the keyword 

as-set

 to generate path attribute information and 

include it in the aggregate. 

AS_SET includes AS_PATH and community information from the routes included 
in the aggregated route.

attribute-map

 

map-name

(OPTIONAL) Enter the keywords 

attribute-map

 followed by the name of a 

configured route map to modify attributes of the aggregate, excluding AS_PATH 
and NEXT_HOP attributes.

summary-only

 

(OPTIONAL) Enter the keyword 

summary-only

 to advertise only the aggregate 

address. Specific routes will not be advertised.

suppress-map

 

map-name

(OPTIONAL) Enter the keywords 

suppress-map

 followed by the name of a 

configured route map to identify which more-specific routes in the aggregate are 
suppressed.

Version 8.4.2.1

Introduced on C-Series and S4810.

Version 8.2.1.0

Introduced on E-Series ExaScale

Version 7.4.1.0

Introduced on E-Series TeraScale

Summary of Contents for Force10 TeraScale C Series









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands