Dell Force10 TeraScale C Series, Reference Manual

Page: 1559 / 1640

E-Series Debugging and Diagnostics | 1559
• show hardware fpc forward
• show hardware fpc lookup detail
• show hardware rpm cp
• show hardware rpm mac counters
• show hardware rpm rp1/rp2
• show interfaces link-status
• show logging driverlog
• show running-config hardware-monitor
See also in Chapter 23, Interfaces” :
• show interfaces phy
• show interfaces transceiver
clear hardware btm
e
Clear the Buffer Traffic Manager (BTM) error counters and status registers.
Syntax clear hardware { rpm | linecard } number port-set pipe-number btm { egress | ingress | all}
{ errors | status }
Parameters
Defaults No default behavior or values
Command Modes EXEC
EXEC Privilege
Command
History
rpm
Enter the keyword
rpm
to clear BTM error counters or status registers on
the RPM.
linecard number
Enter the keyword
linecard
followed by the line card slot number to clear
BTM error counters or status registers on the specified line card.
Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300
port-set pipe-number
Enter the keyword
port-set
followed by the number of the line card or
RPM’s Port-Pipe.
Range: 0 to 1
egress errors
|
status (OPTIONAL) Enter the keywords
egress errors
or
egress status
to
clear egress BTM error counters or ingress BTM status registers.
ingress errors | status
(OPTIONAL) Enter the keywords
ingress errors
or
ingress status
to clear ingress BTM error counters or ingress BTM status registers.
all errors
|
status (OPTIONAL) Enter the keywords
all errors
or
all status
to clear both
egress and ingress BTM error counters and status registers.
Version 6.5.4.0 Introduced