Dell Force10 TeraScale C Series, Reference Manual

Page: 1256 / 1640

1256 | Remote Monitoring (RMON)
www.dell.com | support.dell.com
Parameters
Defaults No default behavior
Command Modes CONFIGURATION INTERFACE (config-if)
Command
History
rmon event
c e s
Add an event in the RMON event table.
Syntax rmon event number [ log ] [ trap community ] [ description string ] [ ownername ]
To disable RMON on an interface, use the no rmon event number [ log ] [ trap community ]
[ description string ] command.
Parameters
Defaults
as described above
Command Modes
CONFIGURATION
Command
History
controlEntry integer
Enter the keyword
controlEntry
to specify the RMON group of statistics
using a value. Then enter an integer value from 1 to 65535 that identifies the
RMON Statistic Table. The integer value must be a unique in the RMON
Statistic Table.
owner name (OPTIONAL) Enter the keyword
owner
followed by the owner name to
record the owner of the RMON group of statistics.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series
number Assign an event number in integer format from 1 to 65535. The number
value must be unique in the RMON Event Table.
log
(OPTIONAL) Enter the keyword
log
to generate an RMON log entry. The
log entry is triggered and sets the eventType in the RMON MIB to log or
log-and-trap.
Default: No log
trap community
(OPTIONAL) Enter the keyword
trap
followed by an SNMP community
string to configure the eventType setting in the RMON MIB. This sets either
snmp-trap or log-and-trap.
Default: public
description string
(OPTIONAL) Enter the keyword
description
followed by a string
describing the event.
owner name
(OPTIONAL) Enter the keyword
owner
followed by the name of the
owner of this event.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 6.1.1.0 Introduced for E-Series