Dell Dimension L c Series, Reference And Troubleshooting Manual

Page: 137 / 174

System Setup Program B-15
%RRW6FUHHQ
)LJXUH%%RRW6FUHHQ0HQX
7DEOH%%RRW6FUHHQ0HQX2SWLRQV
2SWLRQ )XQFWLRQ
Quiet Boot Enabled (default) displays the Dell logo. Disabled displays
the normal POST messages.
Quick Boot When set to Enabled , this option shortens POST by eliminat-
ing some tests. If set to Disabled (default), all POST tests
occur.
Restore on AC/
Power Loss
Determines what state the system enters when AC power
is restored after a power loss. Settings are as follows:
‡
Last State (default) — System returns to the state it
was in when power was lost.
‡
Stays Off — System stays off when power is restored;
you must press the power button to restore power.
‡
Power On — System turns on when power is restored.
On LAN This option controls how the system responds to a Wakeup
On LAN event. The selections are Power On (default) or Stays
Off .
On PME This option controls how the system responds to a PCI power
management enabled (PME) wakeup event. The selections are
Power On or Stays Off (default).
NOTE: The Glossary in the system Help defines abbreviations and acronyms.