Dell Dimension L c Series, Reference And Troubleshooting Manual

Page: 77 / 174

Software Solutions 5-7
7. In the All Files list, double-click setup.exe . The drivers are automatically loaded
onto the system.
8. When the Welcome window appears, click Next and follow any installation
prompts.
9. When prompted to restart your system to complete the installation, remove the
Dell Dimension ResourceCD
from the CD-ROM drive, and then click Finish.
,QWHO&KLS6HW'ULYHUIRU:LQGRZV
Your system’s Intel 810 chip set driver is operative when you receive the system—no
further installation or configuration is needed. If you ever need to reinstall this driver,
perform the following steps:
1. Start the Windows 98 operating system.
2. Insert the
Dell Dimension ResourceCD
into the CD-ROM drive. The Dell Dimen-
sion ResourceCD screen appears. Click the right-arrow button.
3. The first time that you use the
Dell Dimension ResourceCD
, you are prompted to
select a language. Select the language of your choice and click OK .
4. In the All Folders list, click the drivers folder. An alert message appears, inform-
ing you that only knowledgeable users should install drivers. Click OK to continue.
5. In the All Folders list, click the win98 folder.
6. In the Description list, click Dimension Lxxxc: Intel 810 Chip Set Driver .
7. In the All Files list, double-click setup.exe .
8. Click Next to start the driver installation or click Quit to exit the installation
process.
9. When prompted to restart your system to complete the installation, remove the
Dell Dimension ResourceCD from the CD-ROM drive, and then click Finish .
1,&'ULYHUV
Your system’s network interface controller (NIC) drivers are operative when you
receive the system—no further installation or configuration is needed. If you ever
need to reinstall these drivers for systems with an integrated NIC, refer to the appro-
priate procedure in the following subsections.
1,&'ULYHUIRU:LQGRZV
To reinstall the NIC driver for Windows 98, perform the following steps:
1. Start the Windows 98 operating system.
2. Insert the Dell Dimension ResourceCD into the CD-ROM drive. The Dell Dimen-
sion ResourceCD screen appears. Select Exit .
3. From the Windows desktop, right-click My Computer and click Properties .