Dell Dimension L c Series Reference And Troubleshooting Manual Download Page 94

Page: 94 / 174

6-10 Dell Dimension Lxxxc Systems Reference and Troubleshooting Guide

11. At the

prompt, type

[

(where

[

is the drive letter for the CD-ROM or

DVD-ROM drive, which is displayed on the line above the

prompt.) Press

<Enter>.

12. Type

GLDJV

and press <Enter>.

The

DIAGNOSTICS MENU

appears.

13. Type

to quickly test your computer system.

If the tests do not complete successfully, refer to Chapter 7, Getting Help, for

instructions on obtaining technical assistance.

,I<RXU&RPSXWHU,V'DPDJHG

If your computer is dropped or damaged, check it to make sure it still functions

properly. If a device attached to the computer is dropped or damaged, contact the

manufacturer for technical assistance. To troubleshoot a damaged computer, perform

the following steps:

Remove the computer cover and rotate the power supply as described in

Removing and Replacing the Computer Cover and Rotating the Power Supply

Away From the System Board in Chapter 2.

2. Check the connections in the computer.

Check all power and interface cable connections for the drives. Make sure all

cables are securely and properly connected to the system board. Verify that all

expansion cards are firmly seated as shown in Figure 6-1 and that all components

are properly seated in their connectors and sockets.

3. Rotate the power supply back into position, replace the computer cover, and

reconnect the system to an electrical outlet.

4. Insert the

Microsoft Windows 98 Boot Disk

into the diskette drive.

NOTE: For systems running Windows NT, use the Hard Disk Drive and Utilities

diskette included with your computer system or any MS-DOS bootable diskette.

5. Insert the

Dell Dimension ResourceCD

into the CD-ROM or DVD-ROM drive.

6. Turn on the computer system.

If the system does not start, refer to Chapter 7, Getting Help, for instructions

on obtaining technical assistance.

When the boot screen appears, select

2 Start Computer with CD-ROM

Support.

8. At the

prompt, type

[

(where

[

is the drive letter for the CD-ROM or

DVD-ROM drive, which is displayed on the line above the

prompt.) Press

<Enter>.

Summary of Contents for Dimension L c Series















































































































































































Search results

Summary of Contents for Dimension L c Series

Reviews:

Related manuals for Dimension L c Series

Brands by name

Popular brands

Dell Dimension L c Series, Reference And Troubleshooting Manual

Search results

Summary of Contents for Dimension L c Series

Reviews:

Related manuals for Dimension L c Series

Brands by name

Popular brands