manualshive.com logo in svg

Dell Chassis Management Controller, User Manual

Share
Download
Dell Chassis Management Controller User Manual Download Page 94

Applying Profile

When stored profiles are available in the non-volatile media on the CMC, to initiate a server cloning operation, you can 
apply a Stored Profile to one or more servers.

NOTE: If a server does not support Lifecycle Controller or the chassis is powered off, you cannot apply a profile to 
the server.

To apply a profile to one or more server(s):

1.

In the BIOS Profiles page, in the Save and Apply Profiles section, select the servers for which you want to apply the 

selected profile.
The Select Profile drop-down menu gets enabled.

2.

From the Select Profile drop-down menu, select the required profile.
The Apply Profile option gets enabled.

3.

Click Apply Profile.
A warning message is displayed that applying a new BIOS profile will overwrite the current settings and also 
reboot the selected servers. You are prompted to confirm if you want to continue the operation.

NOTE: If CSIOR option is disabled, a warning message is displayed that CSIOR is not enabled for servers 
targeted by the blade cloning operation. You must first enable CSIOR to complete the blade cloning operation.

4.

Click OK to apply the profile to the selected server.
The selected profile is applied to the server(s) and the server(s) is rebooted immediately. For more information, see 
the 

CMC Online Help

.

Related Links

Accessing BIOS Profile Page

Importing Profile

You can import a BIOS profile that is stored previously on a server to CMC.
To import a stored profile on a server to CMC:

1.

In the BIOS Profile page, in the Manage Profiles on SD Card section, click Import Profile.
The Import BIOS Profile section is displayed.

2.

Click Browse to access the profile from the required location and then click Import Profile.
For more information, see the 

CMC Online Help

.

Exporting Profile

You can export a stored BIOS profile saved on the CMC non-volatile media (SD Card) to a specified path on another 
server.
To export a stored profile:

1.

In the BIOS Profile page, in the Manage Profiles on SD Card section, select the required profile, and then click 

Export Profile.
A File Download message box is displayed asking you to open or save the file.

2.

Click Save or Open to export the profile to the required location.

94

Summary of Contents for Chassis Management Controller











































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands